Standard Size Specimens

Standard Flawed Specimens are designed and manufactured to meet the requirements of all known internationally recognized Qualification Programs.

• Advanced training and practice prior to qualifications on :
  • ╾ Flaw detection
  • ╾ Flaw sizing
  • ╾ Flaw interpretation
• Realistic size welds
• Common weld geometries

Sonaspection flawed specimens are avaliable either individually or in sets.

Individual specimens

Contain three different flaw types and are:

• All different sizes
• Uniquely numbered
• Supplied with NDE reports
• Supplied with acceptance/rejection criteria

Recommended sets

• Contain a selection of individual specimens as above, with an average of three flaws per specimen
• Contain at least one example of each flaw type listed in the flaw table
• Contain a minimum total weld length of 360cm (144")

Custom sets

Are manufactured specifically for recognised qualification schemes - for example ASNT ACCP and API

for Level II training, practice and qualification ie ACCP, ASNT-TC-lA, PCN, EN473, API and others

▮ Radiographic Specimens

INDIVIDUAL SPECIMENS

Item NO	Specimen Type	Weld Preparation Type	Approx Dimensions : cm (inch) (or nearest commercial size)			Approx Weight kg (lb)
			Diameter	Thicness	Size
RC-50	Plate		N/A	0.6 (1/4)	30×30 (12×12)	3 (6)
RC-51			N/A	1 (3/8)	30×30 (12×12)	5 (11)
RC-52			N/A	1.5 (5/8)	30×30 (12×12)	7 (15)
RC-53			N/A	2 (3/4)	30×30 (12×12)	10 (22)
RC-54			N/A	2.5 (1)	30×30 (12×16)	20 (44)
RC-55			N/A	3 (11/4)	30×44 (12×17¼)	25 (55)
RC-56	Plate		N/A	0.6 (1/4)	30×30 (12×12)	3 (6)
RC-57			N/A	1 (3/8)	30×30 (12×12)	5 (11)
RC-58			N/A	1.5 (5/8)	30×30 (12×12)	7 (15)
RC-59			N/A	2 (3/4)	30×30 (12×12)	10 (22)
RC-60			N/A	2.5 (1)	30×30 (12×16)	20 (44)
RC-61			N/A	3 (11/4)	30×44 (12×17¼)	25 (55)
RC-62	Pipe		2.5 (1)	0.3 (1/16)	30(12) long	0.5 (1)
RC-63			5 (2)	0.5 (3/16)	30(12) long	1 (2)
RC-64			8 (3)	0.6 (1/4)	30(12) long	3 (6)
RC-65			15 (6)	0.6 (1/4)	30(12) long	5 (11)
RC-66			15 (6)	1.2 (1/2)	30(12) long	10 (22)
RC-67			20 (8)	1.2 (1/2)	30(12) long	15 (33)
RC-68			20 (8)	2 (3/4)	30(12) long	22 (48)
RC-69			30 (12)	1.2 (1/2)	30(12) long	25 (55)
RC-70			30 (12)	2.5 (1)	30(12) long	50 (110)

RECOMMENDED SETS

Item NO	Specimen Type	Contents	Approx Weight kg(lb)
RC-71	set 8	2ea. Item 50 1ea. Item 55 1ea. Item 56 1ea. Item 61 3ea. Item 62 2ea. Item 63 1ea. Item 64 1ea. Item 70	129 (284)

FLAW TABLE

Root crack	Transverse crack	Porosity	Lack of root fusion
Imcomplete penetration	Excess Penetation	Root concavity	Slag line
Undercut	Tungsten inc	Mismatch	Burn through